ROBOpilot

Unmanned Systems

ROBOpilot turns manned aircraft to drones in first 2-hour flight

A mechanical pilot recently completed a two-hour flight at Dugway Proving Ground in Utah.

ROBOpilot, a collection of mechanical arms, cables, pumps and computer equipment, interacts with an aircraft the way a human pilot would – pulling on the yoke, pushing on the rudders, flipping switches and reading dashboard gauges, but with computer vision.  It gets data from GPS and situational awareness sensors and analyzes it to make flight decisions. The project is the result of a collaboration between the Air Force Research Laboratory (AFRL) and Small Business Innovative Research (SBIR) awardee DZYNE Technologies.

While automated flights are nothing new, what's special about ROBOpilot is that the modular system can be rapidly installed in a plane for an autonomous flight without making permanent modifications to the aircraft. That means it can be swapped in and out of aircraft, avoiding the cost of permanently converting planes to unmanned aerial systems.

To install ROBOpilot, users simply remove the pilot’s seat and replace it with a frame that contains all the equipment required for controlling the plane, including actuators, electronics, cameras, power systems and a robotic arm, AFRL officials said.

“ROBOpilot offers the benefits of unmanned operations without the complexity and upfront cost associated with the development of new unmanned vehicles,” said Alok Das, senior scientist at AFRL's Center for Rapid Innovation.

“Imagine being able to rapidly and affordably convert a general aviation aircraft, like a Cessna or Piper, into an unmanned aerial vehicle, having it fly a mission autonomously, and then returning it back to its original manned configuration,” Das said.

This non-invasive approach to robotically piloted aircraft leverages existing commercial technology and components, he said. ROBOpilot incorporates many subsystems and lessons learned from previous AFRL and DZYNE Technology aircraft conversion programs.

During the past year, AFRL and DZYNE designed, built and tested ROBOpilot under a Direct-to-Phase II SBIR contract.  Engineers demonstrated the initial concept in a full-motion simulator designed for advanced aviation training and certified by the Federal Aviation Administration. ROBOpilot successfully completed simulated autonomous takeoffs, mission navigation and landings in a range of conditions.

The ROBOpilot capability enables a host of defense and commercial missions, including cargo delivery, entry into hazardous environments  and ISR missions, DZYNE Technologies said in its SBIR proposal.

This article first appeared on GCN, a partner site of Defense Systems. 

 

About the Author

Susan Miller is executive editor at GCN.

Over a career spent in tech media, Miller has worked in editorial, print production and online, starting on the copy desk at IDG’s ComputerWorld, moving to print production for Federal Computer Week and later helping launch websites and email newsletter delivery for FCW. After a turn at Virginia’s Center for Innovative Technology, where she worked to promote technology-based economic development, she rejoined what was to become 1105 Media in 2004, eventually managing content and production for all the company's government-focused websites. Miller shifted back to editorial in 2012, when she began working with GCN.

Miller has a BA and MA from West Chester University and did Ph.D. work in English at the University of Delaware.

Connect with Susan at smiller@gcn.com or @sjaymiller.

Defense Systems Update

Sign up for our newsletter.

Terms and Privacy Policy consent

I agree to this site's Privacy Policy.